Elite Hi-Light Dry Fall specialist paint

Probably the best paint on the market

• Self priming, multi substrate coating (can be applied directly to bare galvanised steel)
• Available in matt or satin finish (can be tinted to most BS or RAL colours)
• Low VOC, waterbased environmentally friendly product
• Very high light reflectance value - improves working conditions, cuts lighting requirements
• Single application, dramatically cuts labour costs and time on site
• Excellent adhesion on interior cladding, bare galvanised deck & purlins, primed structural steel, drywall, concrete, plaster and both mineral & metal suspended ceiling tiles
• Acrylic content results in minimal yellowing
• Long-lasting, maintainable finish
• Dry-fall overspray allows for minimal masking and preparation
• Easy clean-up with a dry cloth or brush
• Very low odour
• Also available containing silver ion technology for antimicrobial hygienic applications
• Spray paint in all kinds of production settings and in areas containing different kinds of substrate. There is no need to swap products during application, this saves time and money, and it is especially suited for exposed ceilings and overhead surfaces in commercial, warehouse, industrial units, large retail outlets and manufacturing facilities
• Economical - Offers the properties of a specialist coating at a price comparable to most trade emulsions

A waterbased acrylic coating for application on ceilings and walls. Elite Hi-Light Dry Fall is a very practical coating which is intended to be spray applied.

Elite Hi-Light Dry Fall is specially formulated for spray application to interiors in commercial and institutional premises, especially interior cladding. The over-spray turns to dust before hitting the floor, reducing the time spent on clean-up and masking.

Here is the amazing part

Elite Hi-Light Dry Fall can be applied directly onto most substrates including bare galvanised steel, interior cladding, structural steel (spot priming of rust is required prior to application). HVAC trunking, PVC, powder coated substrates and pipe work.

Thinking of using several different types of paint for that job?

Forget it. Elite Hi-Light Dry Fall will almost always do everything you need.

 

 

 

 

Elite Hi-Light Dry Fall can be applied directly onto most substrates including bare galvanised steel, interior cladding, structural steel (spot priming of rust is required prior to application). HVAC trunking, PVC, powder coated substrates and pipe work.

 

 

 

Ideal for interior applications

• Waterbased
• Non-yellowing
• Washable sheen finish
• Excellent productivity
• Self priming
• Excellent adhesion
• Fully permeable
• Minimum masking
• High light reflectance

 

Where to use

Interior cladding, galvanised steel, metal-Pan ceiling tiles, drywall, plaster, metal & concrete, walls and primed structural steel.

 

 

Application

Do not dilute, product is ready for application by airless spray. Apply Hi-Light Elite Dryfall onto substrate. Use airless spray with tip size .013 to .015 with 12 inch fan. Apply Hi-Light Elite Dryfall overlapping each pass of sprayer by 50% to ensure uniform coverage.

On completion of spraying leave overspray at least 20 minutes to settle before de-masking. Clean machine and equipment with warm water, ensure the area is clean and ready for re-occupation.